Redbore 100
The Redbore 100 is the crown jewel of the Redbore series of raise drills and is the most powerful, largest capacity proven raise drilling system ever manufactured. When skipping capacity and drift dimensions are of concern, the machine can be fully dismantled for ease of transportation.
The machine features state-of-the-art electronics and PLC controls systems, allowing unprecedented control over the drilling process.
The Redbore 100 can bore raises up to 26’ (8 m) in diameter, to depths exceeding 3,280’ (1,000 m).
Dimensions
| Extended Height | 296″ (7.53 m) |
|---|---|
| Footprint Width | 117″ (2.97 m) |
| Footprint Depth | 110″ (2.79 m) |
| Weight | 151,838 lbs (69,017 kg) |
Thrust System
| Maximum Upream Force | N/A |
|---|---|
| Maximum Conventional Ream Force | 3,500,000 lbs (15,569 kN) |
| Maximum Downream Force | N/A |
Rotation System
| Reaming Torque | 750,000 ft / lbs (1,016 kN.m) |
|---|
Nominal Parameters
| Pilot Hole Diameter | 17 1/2″ (445 mm) |
|---|---|
| Drill Pipe Diameter | 14 1/2″ (368 mm) |
| Hole Diameter Downream | N/A |
| Hole Diameter Upream | N/A |
| Hole Diameter Conventional | 26′ (8 m) |
| Raise Length Conventional | 3,280′ (1,000 m) |
| Raise Angle | 60 – 90 degrees |
Options
| Redtrax Transporter | N/A |
|---|---|
| Erector System | Yes |
*Electrical systems built to suit regional requirements
Note: Drill specifications including thrust, torque, weights and dimensions are approximate and may vary from those provided.
