The Redbore 90 addresses the growing demand for a raise drill that will efficiently complete raises up to 20’ (6.1 m) in diameter and up to 2,000’ (609 m) deep. This considerably more compact drill provides a cost-effective method to bore large diameter raises while minimizing costly underground excavations. The Redbore 90 is easily dismantled and provides quicker, more efficient equipment mobilization whether on surface or underground; resulting in savings of time and money. Nominal capacities range up to 20’ (6.1 m) diameter raises.
Dimensions
| Extended Height |
219″ (5.56 m) |
| Footprint Width |
93″ (2.36 m) |
| Footprint Depth |
84″ (2.13 m) |
| Weight |
76,460 lbs (34,682 kg) |
Thrust System
| Maximum Upream Force |
N/A |
| Maximum Conventional Ream Force |
2,000,000 lbs (8,896.4 kN) |
| Maximum Downream Force |
N/A |
Rotation System
| Reaming Torque |
475,000 ft / lbs (644 kN.m) |
Nominal Parameters
| Pilot Hole Diameter |
15″ (381 mm) |
| Drill Pipe Diameter |
13 1/8″ (333 mm) |
| Hole Diameter Downream |
N/A |
| Hole Diameter Upream |
N/A |
| Hole Diameter Conventional |
20′ (6.1 m) |
| Raise Length Conventional |
2,000′ (609 m) |
| Raise Angle |
60 – 90 degrees |
Options
| Redtrax Transporter |
N/A |
| Erector System |
Yes |
*Electrical systems built to suit regional requirements
Note: Drill specifications including thrust, torque, weights and dimensions are approximate and may vary from those provided.
