Redbore 50X
The Redbore 50X has been specifically designed for upreaming (blindhole or boxhole) while maintaining a low profile. It is also capable of completing conventional raises. This innovative unit features a retractable wrenching arm, lay-down rod handler, and a drive system with greatly improved transfer of energy, requiring less power during operations.
Nominally, the Redbore 50X is capable of upreaming holes up to 70” (1.8 m) in diameter, to lengths of up to 131’ (40 m).
Redbore 50X
| Extended Height | 135″ (3.43 m) |
|---|---|
| Footprint Width | 90″ (2.28 m) |
| Footprint Depth | 84″ (2.24 m) |
| Weight | 32,250 lbs (14,628 kg) |
Thrust System
| Maximum Upream Force | 300,000 lbs (1,335 kN) |
|---|---|
| Maximum Conventional Ream Force | 300,000 lbs (1,335 kN) |
| Maximum Downream Force | 160,000 lbs (711 kN) |
Rotation System
| Reaming Torque | 68,000 ft-lbs (92.1 kN.m) |
|---|
*Values calculated at 90% efficiency Hydraulically operated upper rod wrench. Note: Drill specifications including thrust, torque, weights and dimensions are approximate and may vary from those provided.
Nominal Parameters
| Pilot Hole Diameter | 11″ (279 mm) |
|---|---|
| Drill Pipe Diameter | 10″ (254 mm) |
| Hole Diameter Downream | 40″ (1.02 m) |
| Hole Diameter Upream | 70″ (1.8 m) |
| Hole Diameter Conventional | 70″ (1.8 m) |
| Raise Length | 600′ (183 m) |
| Raise Angle | 45 – 90 degrees |
Options
| Redtrax Transporter | Yes |
|---|---|
| Erector System | Yes |
*Electrical systems built to suit regional requirements
*Deflectors are optional, must be added to overall height of machine
*Upream values are nominal, diameter and length are site-specific
*Redbore 50X upream length is 50 m
Note: Drill specifications including thrust, torque, weights and dimensions are approximate and may vary from those provided.